PROXXON Bench Circular Saw KS 115, 37006 , Green

PROXXON Bench Circular Saw KS 115, 37006 , Green

PROXXON Bench Circular Saw KS 115, 37006 , Green

PROXXON Bench Circular Saw KS 115, 37006 , Green:at our store, we stock over 2000 models, so if you see the manufacturer, but not the model, don't be shy - give us a call and we will be happy to check! Having already purchased the FBS 115/E rotary tool and the MB200 drill stand, I had no hesitation in ordering the KS 115 Circular Saw. I need to cut hundreds of small parts (1 1/8" x .167") out of 1/8" holly, and when the saw arrived I was shocked at how small and light is. However, cutting these small parts on my full sized table saw is dangerous so I set up the Proxxon and gave it a try. Much to my surprise, it was perfect. The fence, which doesn't look like much more than a toy, is perfectly parallel to the blade as measured with a couple of precision squares. The miter gauge, which looks even more like a toy, holds its setting perfectly - time after time, cut after cut. I wouldn't rely on the miter gauge's scale if extreme accuracy is required, but once you get it dialed in correctly, it stays put. The width of the cuts are exactly .167 over the entire length of the pieces and have no burn marks whatsoever - I problem I did have with my full sized saw on these narrow parts.Just for kicks, I tried cutting some beech and ebony - again out of stock approximately 1/8" thick. Again, no problem and no stalling as was reported in another review. All of this with the standard blade that comes with the unit. As long as the saw is set up correctly and the wood is within its stated capability as to thickness, this unit has proven to be faultless.One final note: It's tempting to view this saw as more of a toy than a real machine. That would be a mistake, as it's more than capable of inflicting injury to the non-focused user. I opted to not use the included blade guard because of the size of the wood I'm working with which makes the guard awkward to use. By doing this, I'm subject to an injury if my concentration level falls. As a result, I treat this mini-saw with the same respect I show when using my full sized saw. So should you.nashville-davidson mall,rapid rise,daily bargain salePROXXON Bench Circular Saw KS 115, 37006 , Green
Identification, Images, & Information
For Insects, Spiders & Their Kin
For the United States & Canada
    This fits your .
  • Make sure this fits by entering your model number.
  • A specialist to cut the smallest pieces, whenever working with a regular circular saw is impossible and too dangerous
  • For perfectly straight cuts in wood, non-ferrous metal, plastics and fiberglass reinforced plastics
  • The high-performance 110 - 120V motor is very quiet and has a prolonged life expectancy
  • Machined and perfectly plane aluminum worktable in size 6 1/4" x 6 1/4" (160 x 160mm)
  • Scope of delivery: 1x PROXXON Bench Circular Saw KS 115 including 1 Super Cut Saw Blade. Part number: 37006
|||

Product description

Product Description

The machine is a specialist to cut the smallest pieces, whenever working with a regular circular saw is impossible and too dangerous. The high-performance 110 - 120V motor is very quiet and has a prolonged life expectancy. Cutting depths: in wood up to 5/16" (8mm), in plastic (also circuit boards) up to approx. 1/8" (3 mm), in non-ferrous metals up to 1/16" (1.5mm). Even fiberglass reinforced plastics can be cut with the carbide tipped saw blade (available as accessory). The machined and perfectly plane aluminum worktable in size 6 1/4" x 6 1/4" (160 x 160mm) allows for sliding the work piece easily. The housing is made of sturdy plastic (ABS) with a side door to conveniently remove saw dust. With the included Super Cut Saw Blade Ø 2 9/32" (58mm) it is possible to cut soft wood up to 5/16" (8mm). Other saw blades, available as accessories in our program, with Ø 2" (50mm), still ensure up to 15/64" (6mm) cutting depth. Other technical data: Overall size approx. 10 1/4" x 7 5/8" x 3 11/64" (265 x 195 x 85mm). Weight approx. 4 lb (1.8kg).

From the Manufacturer

Bench Top Circular Saw KS115, 2-9/32 inch (58 millimeter) saw blade. This machine is a specialist to cut the smallest pieces whenever working with a regular circular saw is impossible and too dangerous. The high-performance 110-120V motor is very quiet and has a prolonged life expectancy. Cutting depths: in wood up to 5/16 inch (8 millimeter), in plastic (also circuit boards) up to approximately 1/8" (3 millimeters), in non-ferrous metals up to 1/16 inches (1.5 millimeter). Even fiberglass reinforced plastics can be cut with the carbide tipped saw blade (available as accessory). The machined and perfectly plane aluminum worktable in size 6-1/4 inches by 6-1/4" (160 by 160 millimeter) allows for sliding the work piece easily. The housing is made of sturdy plastic (ABS) with a side door to conveniently remove saw dust. Overall size 10-11/4 inches by 7-5/8 inches by 3-11/64 inches (265 by 195 by 85 millimeter). Weight is 4 pounds (1.8 kilograms).


From the manufacturer

Crosscut Blade Super-Cut Tungsten Carbide Saw Blade Diamond Blade High-Alloy Special Steel Saw Blade Tungsten Tipped Saw Blade
Crosscut Blade Super-Cut Tungsten Carbide Saw Blade Diamond Blade High-Alloy Special Steel Saw Blade Tungsten Tipped Saw Blade
Description Ø 2 9/32" (58mm) x 1/64" (0.4mm), arbor 13/32" (10mm), 80 teeth. Ideal for use on hard and soft wood, as well as plastic. For fast, clean cuts. The 80 teeth are alternately set and sharpened. For superior cutting power! Ø 2" (50mm) x 1/64" (0.5mm), arbor 13/32" (10mm), fine toothed, 80 teeth. The blade is ideal for cutting fiberglass sheets, non-ferrous metal, miniature moldings, plastics, and other "difficult-to-cut" materials. 50mm diameter (10mm arbor). With 1/64" (0.5mm) layer of class "D107" diamond for cutting ceramics porcelain, tiles, stone as well as circuit boards. Ø 2" (50mm) x 1/64" (0.5mm), arbore 13/32" (10mm), fine, 100 teeth. Alloy holding a high proportion of tungsten, vanadium and molybdenum for an even structure, high hardness and long lifetime. Fine-toothed. For very fine cuts. Ø 2" x 3/64" (50mm x 1.1mm), arbor 13/32" (10mm), 20 teeth. For extremely clean cuts of balsa, plywood. Can also be used for cutting circuit boards and POLYCARBONATE.
Part number 28014 28011 28012 28020 28017
Clickable Guide
Moths Butterflies Flies Caterpillars Flies Dragonflies Flies Mantids Cockroaches Bees and Wasps Walkingsticks Earwigs Ants Termites Hoppers and Kin Hoppers and Kin Beetles True Bugs Fleas Grasshoppers and Kin Ticks Spiders Scorpions Centipedes Millipedes

Calendar
Upcoming Events

BugGuide is a National Moth Week Partner. How to add your National Moth Week 2021 photos. July 17-25.

Photos of insects and people from the Spring 2021 gathering in Louisiana, April 28-May 2

National Moth Week 2020 photos of insects and people.

Photos of insects and people from the 2019 BugGuide Gathering in Louisiana, July 25-27

Discussion, insects and people from the 2018 gathering in Virginia, July 27-29

Photos of insects and people from the 2015 gathering in Wisconsin, July 10-12

Photos of insects and people from the 2014 gathering in Virginia, June 4-7.

Photos of insects and people from the 2013 gathering in Arizona, July 25-28

Previous events


Littlearth NCAA Old School Cinch Backpack, One Size, Team ColorBriggs Stratton 499996 Standard Piston Ring SetVICUTU Wooden Sandalwood Hair Combs for Women Men Wide Fine ToUOSXVC 5-Packs Tool Holders for Dewalt 20V Drill Mount Fit for MFrontline: Drug Lord: The Legend of ShortyTexas Scratch Off Travel Map by MappinnersKoyo BH-78 Needle Roller Bearing, Full Complement Drawn Cup, OpeLUNANI Ring Throwing Game, 2 Player Ring Tosssing Shot Games for
INA Cam FollowerPurrdy Paws 40-Pack Soft Nail Caps for Cat Claws Silver GlitterAlaskan Ulu Cultured Moose Antler Knife Display StandEWDVqqq Girl Yoga Pant Watercolor Pig.JPEG High Waist Fitness WoJude Jewelers Stainless Steel Chevron Ring Statement Promise AnnUSB WiFi Repeater,Wired and Wireless Signal Amplifier AP WiFi SmSongs We SingTriangles on a Roll 2-1/2in Half Square

Welcome to BugGuide.Net!

Photo © Joyce Gross

All Abuzz About Bugs!

We are an online community of naturalists who enjoy learning about and sharing our observations of insects, spiders, and other related creatures.

We enjoy the opportunity to instill in others the fascination and appreciation that we share for the intricate lives of these oft-maligned creatures.

Our Mission

Using the best resources we have access to, we are creating a knowledgebase to help each other and the online community.

Our Method

We collect photographs of bugs from the United States and Canada for identification and research.

We summarize our findings in guide pages for each order, family, genus, and species.

Making New Discoveries

More than just a clearinghouse for information, this site helps expand on the natural histories of our subjects. By capturing the place and time that submitted images were taken, we are creating a virtual collection that helps define where and when things might be found.

We capture never-before-seen behaviors and we have photos of species that you won't find anywhere else on the web.

Join us!

Placed by Robert H. Biagi 19 minutes ago in

Placed by Robert H. Biagi 28 minutes ago in

Placed by Robert H. Biagi 31 minutes ago in

Placed by Robert H. Biagi 33 minutes ago in

Placed by Robert H. Biagi 44 minutes ago in

Placed by Robert H. Biagi 58 minutes ago in




PROXXON Bench Circular Saw KS 115, 37006 , Green

PROXXON Bench Circular Saw KS 115, 37006 , Green:at our store, we stock over 2000 models, so if you see the manufacturer, but not the model, don't be shy - give us a call and we will be happy to check! Having already purchased the FBS 115/E rotary tool and the MB200 drill stand, I had no hesitation in ordering the KS 115 Circular Saw. I need to cut hundreds of small parts (1 1/8" x .167") out of 1/8" holly, and when the saw arrived I was shocked at how small and light is. However, cutting these small parts on my full sized table saw is dangerous so I set up the Proxxon and gave it a try. Much to my surprise, it was perfect. The fence, which doesn't look like much more than a toy, is perfectly parallel to the blade as measured with a couple of precision squares. The miter gauge, which looks even more like a toy, holds its setting perfectly - time after time, cut after cut. I wouldn't rely on the miter gauge's scale if extreme accuracy is required, but once you get it dialed in correctly, it stays put. The width of the cuts are exactly .167 over the entire length of the pieces and have no burn marks whatsoever - I problem I did have with my full sized saw on these narrow parts.Just for kicks, I tried cutting some beech and ebony - again out of stock approximately 1/8" thick. Again, no problem and no stalling as was reported in another review. All of this with the standard blade that comes with the unit. As long as the saw is set up correctly and the wood is within its stated capability as to thickness, this unit has proven to be faultless.One final note: It's tempting to view this saw as more of a toy than a real machine. That would be a mistake, as it's more than capable of inflicting injury to the non-focused user. I opted to not use the included blade guard because of the size of the wood I'm working with which makes the guard awkward to use. By doing this, I'm subject to an injury if my concentration level falls. As a result, I treat this mini-saw with the same respect I show when using my full sized saw. So should you.nashville-davidson mall,rapid rise,daily bargain salePROXXON Bench Circular Saw KS 115, 37006 , Green