Flashforge Dreamer 3D Printer Dual Extruder Color Print WIFI Tou

Flashforge Dreamer 3D Printer Dual Extruder Color Print WIFI Tou

4

Flashforge Dreamer 3D Printer Dual Extruder Color Print WIFI Tou

Flashforge Dreamer 3D Printer Dual Extruder Color Print WIFI Tou:at our store, we stock over 2000 models, so if you see the manufacturer, but not the model, don't be shy - give us a call and we will be happy to check! Pros:The printer was set up and printing accurately within 30 minutes. Installing the extruder was the most difficult part, but that was only because I was having trouble lining up the provided bolts. I feel like that’s more due to my lack of dexterity then a design flaw.Print accuracy seems to be perfect. I printed the 40mm x 40mm test cube and measured with some Calipers: 40.0mm x 40.05mm, which is absolutely fine for my purposes.I also printed a “Benchy” benchmarking print (see pic # 1.) This printer handled PLA printing with ease. It had no problems, and the unsupported overhang in the cabin of the boat worked well. The Benchy on the right is with the door and top closed, and the Benchy on the left is with the door and top open as recommended. I can’t really see much of a practical difference, so cooling for PLA seems to be very good even with the printer completely closed (and slightly quieter)Zeroing the Z-axis is easy as pie, the printer runs you though the process.Replacing the filament is also very easy, the machine runs you though the process.Printing time seems reasonable.The provided toolkit is very useful for both installing and general use of the printer.The printer is well lit, which is helpful when checking on the printer during prints. (See pic #2.) This was at night for context.Cons:It is a little frustrating that most filaments sizes will not fit inside the enclosure out of the box. Fortunately, I was able to find an adapter for larger filament sizes on Thingiverse, so now I can print with Hatchbox 1kg spools without having to run the spools though the top of the printer. I recommend you do the same so you can use more economical filaments.The printer is louder then I expected considering it’s enclosed. This is fine for me, since I put it in a closet in my room, but unless you have a separate room available, it might be a bit annoying. This is a problems with most 3D printers, so I’m really not that upset about it.I would have liked to see some Nippers in the box to nip off things like support material, but honestly I can’t really complain too much about that since I was able to use a knife to remove support materials so far.I am running into a squeak during operation after only about 15 hours of use, and I’m not sure where it’s coming from. I don’t see any damage on any of the rails, so I’m not sure what’s causing it. Just figured I’d mention it.under blast sales,popular brand in the world,financial sales saleFlashforge Dreamer 3D Printer Dual Extruder Color Print WIFI Tou
Identification, Images, & Information
For Insects, Spiders & Their Kin
For the United States & Canada
    This fits your .
  • Make sure this fits by entering your model number.
  • Dual extruder – Support dual color print and dual material print.Flashforge Dreamer make it come true that more complicated prints can be printed perfectly
  • Heating bed – Rapid steady heating prevent model warping much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG,TPU etc
  • "li" Intelligent leveling – Dreamer features an intuitive calibration detection system to assist leveling. you’re well instructed with clear messages on the touchscreen display. And all of these make calibration much easier and more precise "li" Out of the box – Dreamer is suitable for industrial design,tool design,architecture designer,mechanical designer etc "li" What you get – Flashforge 3d printer Dreamer,12 months warranty, lifetime technical assistance and 12 hours professional customer service
|||

Product description

Specifications
● Package Size: 565x430x535mm
● Dreamer Size: 485*344*382(402)mm
● Package Weight: 18KGS
● Net Weight: 10.7KGS
● Resolution: 0.1~0.2mm
● Build Volume: 230x150x140mm
● Filament Compatibility: ABS/PLA/HIPS/PVA/Flexible Filament
● File Format: 3MF/STL/OBJ/FPP/BMP/PNG/JPG/JPEG -gt;GX/G
● Operating System: Win xp/Vista/7/8/10、Mac OS、Linux
● Touch Screen: 3.5’’ color IPS Touch Screen
● Software: Flashprint,Simplify3D
Basic Parameter
● Extruder: 2
● Technology: FFF
● Positioning Accuracy:Z axis 0.0025mm; XY axis 0.011mm
● Printing Accuracy: ±0.1-0.2mm
● Layer Resolution: 0.05-0.4mm
● Nozzle Diameter: 0.4mm
● Shaft Speed: 30~100mm/s
● Suggested Extruder Temp.: 240
● Suggested Platform Temp.: ABS 105-110, PLA 50-55

Clickable Guide
Moths Butterflies Flies Caterpillars Flies Dragonflies Flies Mantids Cockroaches Bees and Wasps Walkingsticks Earwigs Ants Termites Hoppers and Kin Hoppers and Kin Beetles True Bugs Fleas Grasshoppers and Kin Ticks Spiders Scorpions Centipedes Millipedes

Calendar
Upcoming Events

BugGuide is a National Moth Week Partner. How to add your National Moth Week 2021 photos. July 17-25.

Photos of insects and people from the Spring 2021 gathering in Louisiana, April 28-May 2

National Moth Week 2020 photos of insects and people.

Photos of insects and people from the 2019 BugGuide Gathering in Louisiana, July 25-27

Discussion, insects and people from the 2018 gathering in Virginia, July 27-29

Photos of insects and people from the 2015 gathering in Wisconsin, July 10-12

Photos of insects and people from the 2014 gathering in Virginia, June 4-7.

Photos of insects and people from the 2013 gathering in Arizona, July 25-28

Previous events


Race Tech Fork Springs - .95 kg/mm FRSP S4031095Organic Wheatgrass Seed - Certified USA Hard Red Wheat by PowerGTranceology 2Show Chrome Accessories (18-203) Smooth Blade Brake LeverV-inspire art, 30x40 inch Modern hand-painted art, lovers in raiFULINJOY 3 Pcs Nail Drawing Pen, Dual End Nail Art Pen Brush AcrUniversal Baby Safety Strap Infant, 5 Points Security Harness BeGloria Kitchen Rug Set 2 Piece Non-Slip Kitchen Mat Runner Doorm
Ghirardelli Intense Dark Premium Dark Chocolate Assortment 15 OzSuper Strap Super SheetGOSEN Polylon Comfort Series (Five-Petals Structured Polyester sNew Brass Air Compressor In Tank Check Valve 1/2" Male X 1/2" Feddrum Red Shot 5-Piece Drum Trigger KitImpecGear mens BaseballInfliktedBlack and Decker LED3FOLD-BLK 5W LED Desk Lamp with USB Charging

Welcome to BugGuide.Net!

Photo © Joyce Gross

All Abuzz About Bugs!

We are an online community of naturalists who enjoy learning about and sharing our observations of insects, spiders, and other related creatures.

We enjoy the opportunity to instill in others the fascination and appreciation that we share for the intricate lives of these oft-maligned creatures.

Our Mission

Using the best resources we have access to, we are creating a knowledgebase to help each other and the online community.

Our Method

We collect photographs of bugs from the United States and Canada for identification and research.

We summarize our findings in guide pages for each order, family, genus, and species.

Making New Discoveries

More than just a clearinghouse for information, this site helps expand on the natural histories of our subjects. By capturing the place and time that submitted images were taken, we are creating a virtual collection that helps define where and when things might be found.

We capture never-before-seen behaviors and we have photos of species that you won't find anywhere else on the web.

Join us!

Placed by Robert H. Biagi 19 minutes ago in

Placed by Robert H. Biagi 28 minutes ago in

Placed by Robert H. Biagi 31 minutes ago in

Placed by Robert H. Biagi 33 minutes ago in

Placed by Robert H. Biagi 44 minutes ago in

Placed by Robert H. Biagi 58 minutes ago in




Flashforge Dreamer 3D Printer Dual Extruder Color Print WIFI Tou

Flashforge Dreamer 3D Printer Dual Extruder Color Print WIFI Tou:at our store, we stock over 2000 models, so if you see the manufacturer, but not the model, don't be shy - give us a call and we will be happy to check! Pros:The printer was set up and printing accurately within 30 minutes. Installing the extruder was the most difficult part, but that was only because I was having trouble lining up the provided bolts. I feel like that’s more due to my lack of dexterity then a design flaw.Print accuracy seems to be perfect. I printed the 40mm x 40mm test cube and measured with some Calipers: 40.0mm x 40.05mm, which is absolutely fine for my purposes.I also printed a “Benchy” benchmarking print (see pic # 1.) This printer handled PLA printing with ease. It had no problems, and the unsupported overhang in the cabin of the boat worked well. The Benchy on the right is with the door and top closed, and the Benchy on the left is with the door and top open as recommended. I can’t really see much of a practical difference, so cooling for PLA seems to be very good even with the printer completely closed (and slightly quieter)Zeroing the Z-axis is easy as pie, the printer runs you though the process.Replacing the filament is also very easy, the machine runs you though the process.Printing time seems reasonable.The provided toolkit is very useful for both installing and general use of the printer.The printer is well lit, which is helpful when checking on the printer during prints. (See pic #2.) This was at night for context.Cons:It is a little frustrating that most filaments sizes will not fit inside the enclosure out of the box. Fortunately, I was able to find an adapter for larger filament sizes on Thingiverse, so now I can print with Hatchbox 1kg spools without having to run the spools though the top of the printer. I recommend you do the same so you can use more economical filaments.The printer is louder then I expected considering it’s enclosed. This is fine for me, since I put it in a closet in my room, but unless you have a separate room available, it might be a bit annoying. This is a problems with most 3D printers, so I’m really not that upset about it.I would have liked to see some Nippers in the box to nip off things like support material, but honestly I can’t really complain too much about that since I was able to use a knife to remove support materials so far.I am running into a squeak during operation after only about 15 hours of use, and I’m not sure where it’s coming from. I don’t see any damage on any of the rails, so I’m not sure what’s causing it. Just figured I’d mention it.under blast sales,popular brand in the world,financial sales saleFlashforge Dreamer 3D Printer Dual Extruder Color Print WIFI Tou