Two Pieces 3D Printing Build Surface, 235x235mm Universal Heat B

Two Pieces 3D Printing Build Surface, 235x235mm Universal Heat B

Two Pieces 3D Printing Build Surface, 235x235mm Universal Heat B

Two Pieces 3D Printing Build Surface, 235x235mm Universal Heat B:at our store, we stock over 2000 models, so if you see the manufacturer, but not the model, don't be shy - give us a call and we will be happy to check! Likes:It is a heavy piece of Glass. I've done some testing with mixed results. Even though it is not the same as the current image as shown in the ad, I am glad that the center logo has been removed! It looks good after all the the work I had to do to set it up! (see below).Dislikes:--Adhesive Backing: Why sell it with clips if you put an adhesive backing on it! I decided to keep the plate. However, it took me nearly an hour to remove the adhesive material on the back side of it. A REAL PAIN. A small amount of the sticky gunk I scraped off is shown in the 2nd photo. This feature is not described in the Amazon listing.--Shape of the plate: The photo on Amazon clearly shows a small tab on the bottom corner. I thought this would be neat to move the heated bed and possibly avoid burning my fingers. This may have been a false hope. However, it was the main reason I selected this item!--Clips: Cheap and not large enough to hold the plate to my Ender 3. Guys, you know it this is a thick piece of glass! Supply it with adequate clips!--Amazon Reviews: It was difficult to separate the reviews on this item as both this glass bed plate and a 3D printer were sold on the same page. After the fact, I found a review that described and complained about the adhesive backing.I am disappointed with this purchase.philadelphia mall,low price,max 48% offTwo Pieces 3D Printing Build Surface, 235x235mm Universal Heat B
Identification, Images, & Information
For Insects, Spiders & Their Kin
For the United States & Canada
    This fits your .
  • Make sure this fits by entering your model number.
  • 【Compatibility】Size: 235mm x 235mm, The flexible bed is fit for Geeetech A10/A10M/A10T, Ender-3, Ender-3 Pro, Ender-3 V2, Ender-5 and CR-20, CR-20 Pro, etc. It can also be cut into any small size you want.
  • 【Quick Install】Single sheet design installs more quickly, just fix on the hot bed platform. Easily attached to your heated print bed, instantly adhesive, easy to use, and it has fewer bubbles than tape or films. Or you can just use clips to fix it on the edge.
  • 【High Performance】 The super flat surface can be heated evenly. No warpage, High strength and heat resistance allows the 3D Printer surface to perform consistently in different temperature environments.
  • 【Wide Used】Suitable for PLA, PETG, ABS,PEEK,HIPS and more types of filaments. This 3d printer Mylar sheet is allowed to use the same or different filament materials multiple times, just wipe with alcohol between printing to get the best results.
  • 【Quality Assurance】 We have been committed to producing products that satisfy customers, but if there is a quality problem, please feel free to contact us. We provide lifetime technical support and 24-hour professional customer service.
|||

Product description

Style:Flexible bed

Size:9.25''*9.25''(235mm x 235mm)gt;brgt; Color: Black

How To Use There are 2 methods to install the 3D Printing Build Surface on heat bed
1. Simply remove the 3M adhesive paper on back side then stick it on your heat bed

2. Fix it with clips around the edges.(at last 3 pcs)

Clickable Guide
Moths Butterflies Flies Caterpillars Flies Dragonflies Flies Mantids Cockroaches Bees and Wasps Walkingsticks Earwigs Ants Termites Hoppers and Kin Hoppers and Kin Beetles True Bugs Fleas Grasshoppers and Kin Ticks Spiders Scorpions Centipedes Millipedes

Calendar
Upcoming Events

BugGuide is a National Moth Week Partner. How to add your National Moth Week 2021 photos. July 17-25.

Photos of insects and people from the Spring 2021 gathering in Louisiana, April 28-May 2

National Moth Week 2020 photos of insects and people.

Photos of insects and people from the 2019 BugGuide Gathering in Louisiana, July 25-27

Discussion, insects and people from the 2018 gathering in Virginia, July 27-29

Photos of insects and people from the 2015 gathering in Wisconsin, July 10-12

Photos of insects and people from the 2014 gathering in Virginia, June 4-7.

Photos of insects and people from the 2013 gathering in Arizona, July 25-28

Previous events


Solar Magnetic GPS Tracker - Equipment, Truck, Trailer, RV, TracTGOOD Happy Spring Summer Welcome Garden Flag 12"x 18" Double SiUOSXVC 5-Packs Tool Holders for Dewalt 20V Drill Mount Fit for MNickel Silver Sheet 18 Gauge 6"x3" for Jewelry Making UnpolishedIt's a Good ThingLUNANI Ring Throwing Game, 2 Player Ring Tosssing Shot Games forSiskiyou Sports Aviator SunglassesWhere We All Belong
One Drop Only Mundpflege Konzentrat, 50ml [Badartikel]The Good, the Bad and the Ugly 4KUHDAjax Scientific Brass Crucible Tong, 200mm LengthPerri's Leather Cob Safety Halter, TurquoiseNitrous Express 15952 Holley Fuel Pressure Regulator w/Fuel PresAllgala Poly Mailers Shipping Envelopes Bags Waterproof/Self SeaBuzzTV XRS4000 - 4GB RAM 32GB Storage Dual Band WiFi + Free Extr2020 Panini Phoenix Fire Burst #105 Jerry Jeudy Denver Broncos (

Welcome to BugGuide.Net!

Photo © Joyce Gross

All Abuzz About Bugs!

We are an online community of naturalists who enjoy learning about and sharing our observations of insects, spiders, and other related creatures.

We enjoy the opportunity to instill in others the fascination and appreciation that we share for the intricate lives of these oft-maligned creatures.

Our Mission

Using the best resources we have access to, we are creating a knowledgebase to help each other and the online community.

Our Method

We collect photographs of bugs from the United States and Canada for identification and research.

We summarize our findings in guide pages for each order, family, genus, and species.

Making New Discoveries

More than just a clearinghouse for information, this site helps expand on the natural histories of our subjects. By capturing the place and time that submitted images were taken, we are creating a virtual collection that helps define where and when things might be found.

We capture never-before-seen behaviors and we have photos of species that you won't find anywhere else on the web.

Join us!

Placed by Robert H. Biagi 19 minutes ago in

Placed by Robert H. Biagi 28 minutes ago in

Placed by Robert H. Biagi 31 minutes ago in

Placed by Robert H. Biagi 33 minutes ago in

Placed by Robert H. Biagi 44 minutes ago in

Placed by Robert H. Biagi 58 minutes ago in




Two Pieces 3D Printing Build Surface, 235x235mm Universal Heat B

Two Pieces 3D Printing Build Surface, 235x235mm Universal Heat B:at our store, we stock over 2000 models, so if you see the manufacturer, but not the model, don't be shy - give us a call and we will be happy to check! Likes:It is a heavy piece of Glass. I've done some testing with mixed results. Even though it is not the same as the current image as shown in the ad, I am glad that the center logo has been removed! It looks good after all the the work I had to do to set it up! (see below).Dislikes:--Adhesive Backing: Why sell it with clips if you put an adhesive backing on it! I decided to keep the plate. However, it took me nearly an hour to remove the adhesive material on the back side of it. A REAL PAIN. A small amount of the sticky gunk I scraped off is shown in the 2nd photo. This feature is not described in the Amazon listing.--Shape of the plate: The photo on Amazon clearly shows a small tab on the bottom corner. I thought this would be neat to move the heated bed and possibly avoid burning my fingers. This may have been a false hope. However, it was the main reason I selected this item!--Clips: Cheap and not large enough to hold the plate to my Ender 3. Guys, you know it this is a thick piece of glass! Supply it with adequate clips!--Amazon Reviews: It was difficult to separate the reviews on this item as both this glass bed plate and a 3D printer were sold on the same page. After the fact, I found a review that described and complained about the adhesive backing.I am disappointed with this purchase.philadelphia mall,low price,max 48% offTwo Pieces 3D Printing Build Surface, 235x235mm Universal Heat B