Artillery Sidewinder X1 3D Printer - Newest V4 Pre-Assembled 300

Artillery Sidewinder X1 3D Printer - Newest V4 Pre-Assembled 300

3

Artillery Sidewinder X1 3D Printer - Newest V4 Pre-Assembled 300

Artillery Sidewinder X1 3D Printer - Newest V4 Pre-Assembled 300:at our store, we stock over 2000 models, so if you see the manufacturer, but not the model, don't be shy - give us a call and we will be happy to check! Purchased this Artillery Sidewinder X1 3D Printer V4 from Amazon via Yenny Shop. This is my first 3D printer so I can't compare it to others, but I am very happy with it so far. In the week I have had it, I have printed the 3D printing "Hello World" cube, several small robot pieces of my own design (mostly flat-ish and less than 3"x3") and one medium sized cat figurine, using PLA filament. I use a combination of FreeCad and Cura Slicer to create the pieces. I then transfer them from Cura to the provided USB stick and print from the touch screen. The Artillery Sidewinder took me about 30 minutes to assemble and was ready to print after leveling the bed.The order took 4 days from the time I ordered it until it arrived. The box was in good shape and came with all parts and spare parts. Instructions are minimal, but were enough to get me started. I watched a lot of youtube videos before I purchased this. They helped.new york mall,max 48% off,philadelphia mallArtillery Sidewinder X1 3D Printer - Newest V4 Pre-Assembled 300
Identification, Images, & Information
For Insects, Spiders & Their Kin
For the United States & Canada
    This fits your .
  • Make sure this fits by entering your model number.
  • ♠ Direct Drive Extruder - With Titan Extruder, it makes your printer more reliable, especially for flexible filaments.
  • ♠ AC Heating Platform - For quick heating, easy to remove print models and save on masking tape.
  • ♠ Synchronized Dual Z System - Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down.
  • ♠ Power Failure Protection - Continue printing from the position where the last print was stopped during the power failure, and you can stop the continuous operation or power off.
  • ♠ Easy to Use - The 3D printer is easy to install and remove, touch screen control makes it easy to use.
|||

Product description

Description:
Artillery Sidewinder-X1 is a 3D printer with power panic, quiet stepper drivers, direct drive extrusion, filament runout sensor, dual Z system, AC heating platform, touch screen.

Specification:
Frame: Aluminum Extrusion
Layer Resolution: 0.1mm
XYZ Positioning Accuracy: 0.05mm, 0.05mm, 0.1mm
Printing Filament: PLA, ABS, TPU, Flexible Materials
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm
Extruder Type: Titan Extruder (Direct Drive)
Maximum Build Plate Temperature: 130°C
Power Requirement: 110V, 600W max (with the heated bed turned on)
Connectivity: USB, TF Card, USB Stick
Control Board: MKS Gen L
Nozzle Type: Volcano
Maximum Print Speed: 150 mm/s
Maximum Travel Speed: 250mm/s
Build Volume: 11.81" x 11.81" x 15.75" / 300 x 300 x 400 mm
Machine Dimensions:
21.65" x 15.94" x 25.20" / 550 x 405 x 640 mm (L x W x H)
21.65" x 15.94" x 34.25" / 550 x 405 x 870 mm (L x W x H) (with spool holder)
Shipping Box Dimensions:
30.71" x 21.26" x 9.84" / 780 x 540 x 250 mm (L x W x H)
Machine Weight: 493.84oz / 14kg
Standard: US, Version 4

Notice:
1. Adjust the print version first when you use it.
2. After the printing is completed, do not directly turn off the power of the machine. Instead, the cooling fan of the extrusion head should continue to work in order to quickly lower the temperature, so as to avoid the blockage caused by thermal expansion. Turn on the cooling fan again after heating.
3. Do not heat the extrusion head for a long time without using the printer.

Package Including
1 x 3D Printer

Clickable Guide
Moths Butterflies Flies Caterpillars Flies Dragonflies Flies Mantids Cockroaches Bees and Wasps Walkingsticks Earwigs Ants Termites Hoppers and Kin Hoppers and Kin Beetles True Bugs Fleas Grasshoppers and Kin Ticks Spiders Scorpions Centipedes Millipedes

Calendar
Upcoming Events

BugGuide is a National Moth Week Partner. How to add your National Moth Week 2021 photos. July 17-25.

Photos of insects and people from the Spring 2021 gathering in Louisiana, April 28-May 2

National Moth Week 2020 photos of insects and people.

Photos of insects and people from the 2019 BugGuide Gathering in Louisiana, July 25-27

Discussion, insects and people from the 2018 gathering in Virginia, July 27-29

Photos of insects and people from the 2015 gathering in Wisconsin, July 10-12

Photos of insects and people from the 2014 gathering in Virginia, June 4-7.

Photos of insects and people from the 2013 gathering in Arizona, July 25-28

Previous events


Race Tech Fork Springs - .95 kg/mm FRSP S4031095Organic Wheatgrass Seed - Certified USA Hard Red Wheat by PowerGTranceology 2Show Chrome Accessories (18-203) Smooth Blade Brake LeverV-inspire art, 30x40 inch Modern hand-painted art, lovers in raiFULINJOY 3 Pcs Nail Drawing Pen, Dual End Nail Art Pen Brush AcrUniversal Baby Safety Strap Infant, 5 Points Security Harness BeGloria Kitchen Rug Set 2 Piece Non-Slip Kitchen Mat Runner Doorm
LiltingCeramic Attractively Hand Painted Gorgeous Stoneware Yarn Ball SStarrett 449BZ-6R Vernier Depth Gauge, Micrometer Type, 0-6" RanCashel Nylon Fleece Lined Straight Breast CollarFour Seasons 35718 Lever Selector Blower Switch52mm Digital Tulip Flower Lens Hood for Canon 50mm f/1.8 II, 135Pedicure Egg Foot File with 2 Emery PadsSpeedy Pros Baseball Cap Us Air Force Retired Embroidery Acrylic

Welcome to BugGuide.Net!

Photo © Joyce Gross

All Abuzz About Bugs!

We are an online community of naturalists who enjoy learning about and sharing our observations of insects, spiders, and other related creatures.

We enjoy the opportunity to instill in others the fascination and appreciation that we share for the intricate lives of these oft-maligned creatures.

Our Mission

Using the best resources we have access to, we are creating a knowledgebase to help each other and the online community.

Our Method

We collect photographs of bugs from the United States and Canada for identification and research.

We summarize our findings in guide pages for each order, family, genus, and species.

Making New Discoveries

More than just a clearinghouse for information, this site helps expand on the natural histories of our subjects. By capturing the place and time that submitted images were taken, we are creating a virtual collection that helps define where and when things might be found.

We capture never-before-seen behaviors and we have photos of species that you won't find anywhere else on the web.

Join us!

Placed by Robert H. Biagi 19 minutes ago in

Placed by Robert H. Biagi 28 minutes ago in

Placed by Robert H. Biagi 31 minutes ago in

Placed by Robert H. Biagi 33 minutes ago in

Placed by Robert H. Biagi 44 minutes ago in

Placed by Robert H. Biagi 58 minutes ago in




Artillery Sidewinder X1 3D Printer - Newest V4 Pre-Assembled 300

Artillery Sidewinder X1 3D Printer - Newest V4 Pre-Assembled 300:at our store, we stock over 2000 models, so if you see the manufacturer, but not the model, don't be shy - give us a call and we will be happy to check! Purchased this Artillery Sidewinder X1 3D Printer V4 from Amazon via Yenny Shop. This is my first 3D printer so I can't compare it to others, but I am very happy with it so far. In the week I have had it, I have printed the 3D printing "Hello World" cube, several small robot pieces of my own design (mostly flat-ish and less than 3"x3") and one medium sized cat figurine, using PLA filament. I use a combination of FreeCad and Cura Slicer to create the pieces. I then transfer them from Cura to the provided USB stick and print from the touch screen. The Artillery Sidewinder took me about 30 minutes to assemble and was ready to print after leveling the bed.The order took 4 days from the time I ordered it until it arrived. The box was in good shape and came with all parts and spare parts. Instructions are minimal, but were enough to get me started. I watched a lot of youtube videos before I purchased this. They helped.new york mall,max 48% off,philadelphia mallArtillery Sidewinder X1 3D Printer - Newest V4 Pre-Assembled 300